Please note that the quiz’s found here are not representative of the actual Cisco exam, they are merely questions to help test your knowledge on a particular subject.
I don’t have access to the exam and can’t provide any information on it, doing so would also be a breach of Cisco NDA – not to mention de-value the qualification that so many people work really hard to obtain.
In short if you want the qualification – you have to earn it!!
All answers to the questions can be found on the CCIE Topic Notes pages
Quiz-summary
0 of 40 questions completed
Questions:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
Information
This quiz tests your knowledge of EIGRP
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 40 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
| Average score |
|
| Your score |
|
Categories
- Advanced Functions 0%
- Authentication 0%
- Foundational Knowledge 0%
- Metrics 0%
- Neighbor Relationships 0%
- Routing 0%
- Summarization 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- Answered
- Review
-
Question 1 of 40
1. Question
EIGRP is which type of protocol?
Correct
Correct. EIGRP is a Hybrid Distance Vector protocol because although each node can’t see the entire topology of the network, it uses calculations based on end to end path metrics.
Incorrect
That is the incorrect answer.
-
Question 2 of 40
2. Question
What is the default HELLO timer on an EIGRP LAN segment?
Correct
Incorrect
That is the incorrect answer.
-
Question 3 of 40
3. Question
What transport does EIGRP use?
Correct
Correct. EIGRP uses its own IP protocol number 88
Incorrect
That is the incorrect answer.
-
Question 4 of 40
4. Question
What must be agreed for EIGRP routers to form an adjacency?
(Select all that apply)Correct
Incorrect
That is the incorrect answer.
-
Question 5 of 40
5. Question
What is the Administrative Distance of EIGRP internal routes?
Correct
Correct! EIGRP internal has an Administrative Distance of 90, while external routes have an Administrative Distance of 170
Incorrect
That is the incorrect answer.
-
Question 6 of 40
6. Question
Match up the Wide metric descriptions with their K number.
Sort elements
- Throughput
- Load
- Latency
- Reliability
- Additional Reliability
- Extended attributes
-
K1
-
K2
-
K3
-
K4
-
K5
-
K6
Correct
Incorrect
That is the incorrect answer.
-
Question 7 of 40
7. Question
Which of the following EIGRP messages are considered reliable?
(Select all that apply)Correct
Incorrect
That is the incorrect answer.
-
Question 8 of 40
8. Question
A route in your routing table is marked as “D EX”.
What is the Administrative Distance of this route?Correct
Incorrect
That is the incorrect answer.
-
Question 9 of 40
9. Question
Match the EIGRP packet type with function
Sort elements
- Used for neighbor discovery. Unreliably communicated.
- Requests more information on a prefix.Reliably communicated.
- Response to QUERY messages. Reliably communicated.
- Provides information on prefixes. Reliably commuicated.
- Used to confirm if neighbor still working on providing reponse to previous query. Reliably communicated.
- Response to a query from neighbor that confirms still working on providing update. Reliably communicated.
- Provides a reliable transport mechanism.
-
HELLO
-
QUERY
-
REPLY
-
UPDATE
-
SIA-QUERY
-
SIA-REPLY
-
ACK
Correct
Incorrect
That is the incorrect answer.
-
Question 10 of 40
10. Question
An EIGRP node unicasts an update to and EIGRP neighbor. What type of packet will the neighbor respond with?
Correct
Incorrect
That is the incorrect answer.
-
Question 11 of 40
11. Question
The EIGRP shortest path to the destination is know as what?
Correct
Incorrect
-
Question 12 of 40
12. Question
What is the default bandwidth percent that EIGRP uses?
Correct
Incorrect
-
Question 13 of 40
13. Question
Because EIGRP is a Hybrid Distance Vector protocol it isn’t affected by the split-horizon rule on multipoint interfces?
Correct
Incorrect
-
Question 14 of 40
14. Question
What does the K2 value represent?
Correct
Incorrect
-
Question 15 of 40
15. Question
What does the K1 wide-metric value represent?
Correct
Incorrect
-
Question 16 of 40
16. Question
The distance between the local router and the destination is known as?
Correct
Incorrect
-
Question 17 of 40
17. Question
What are the tables associated with EIGRP?
Correct
Incorrect
-
Question 18 of 40
18. Question
Where would you be able to see if a route was SIA?
Correct
Incorrect
-
Question 19 of 40
19. Question
Which of the following EIGRP messages are only sent as unicast?
(Select all that apply)Correct
Incorrect
-
Question 20 of 40
20. Question
Which of the following are features of using the EIGRP stub function?
(Select all that apply)Correct
Incorrect
-
Question 21 of 40
21. Question
In the Topology Table you notice a prefix with the (P) symbol next to it. What does this mean?
Correct
Incorrect
-
Question 22 of 40
22. Question
What option in EIGRP is used to determine if Unequal Cost Load Balancing is allowed?
Correct
Incorrect
-
Question 23 of 40
23. Question
Which of the following statements is true regarding EIGRP supported authentication?
(Select all that apply)Correct
Incorrect
-
Question 24 of 40
24. Question
Where are the EIGRP Successor Routes stored?
Correct
Incorrect
-
Question 25 of 40
25. Question
When EIGRP auto-summary is enabled, does EIGRP still carry the subnet mask in the updates?
Correct
Incorrect
-
Question 26 of 40
26. Question
Running the command: #show IP eigrp neighbors displays a neighbor that has a Q CNT of 2. What does this mean?
Correct
Incorrect
-
Question 27 of 40
27. Question
Summarisation can be on any router in the EIGRP domain?
Correct
Incorrect
-
Question 28 of 40
28. Question
What is the default Administrative Distance of a manual summarized route?
Correct
Incorrect
-
Question 29 of 40
29. Question
How do you stop an EIGRP summary route from advertising more specific prefixes?
Correct
Incorrect
-
Question 30 of 40
30. Question
You have the following routes in the routing table:
D 10.0.0.0/24 [90/5673495] via 10.0.100.2
D 10.0.1.0/24 [90/365813] via 10.0.100.2
D 10.0.2.0/24 [90/407921] via 10.0.100.2
D 10.0.3.0/24 [90/6079564] via 10.0.100.2You create a summary route to 10.0.0.0/22 via 10.0.100.2
What will the metric be for this summary route?
Correct
Incorrect
-
Question 31 of 40
31. Question
What command would you use to reduce the amount of bandwidth EIGRP uses for updates?
Correct
Incorrect
-
Question 32 of 40
32. Question
What command is the best method of traffic engineering EIGRP?
Correct
Incorrect
-
Question 33 of 40
33. Question
What is the purpose of a leak-map?
Correct
Incorrect
-
Question 34 of 40
34. Question
What command enables a default route to be injected into EIGRP?
Correct
Incorrect
-
Question 35 of 40
35. Question
Where can EIGRP apply filtering?
Correct
Incorrect
-
Question 36 of 40
36. Question
What does the following standard ACL do when applied to a distribute-list on the inbound direction?
access-list 1 deny 0.0.0.0 255.255.254.255
Correct
Incorrect
-
Question 37 of 40
37. Question
What does the following extended ACL do when used with a distribute-list on the inbound direction
access-list 100 deny ip 0.0.0.0 0.0.0.0 0.0.0.0 255.255.254.255
Correct
Incorrect
-
Question 38 of 40
38. Question
What does the following extended ACL do when used with a distribute-list on the inbound direction
access-list 100 deny ip host 10.1.1.1 10.0.0.0 0.255.255.255
Correct
Incorrect
-
Question 39 of 40
39. Question
What ACL command when applied to a distribute list filters the 10.0.X.0/8 network from any host in the 192.168.0.0/16 range. Where X is equal to any even numbered address.
Correct
Incorrect
-
Question 40 of 40
40. Question
R2#show ip route
10.0.0.0/24 is subnetted, 4 subnets C 10.0.100.0 is directly connected, Ethernet0/0
What does the following command set do on Exhibit A?
R1#(config)#ip prefix-list leak-list permit 10 10.0.3.0/24
R1#(config)#route-map leak permit 10
R1#(config-route-map)#match IP address prefix-list leak-list
R1#(config-if)#ip summary-address eigrp 100 10.0.0.0 255.255.252.0 leak-map leak(Select all that apply)
Correct
Incorrect
